A well-maintained turntable not only sounds better but can also increase the lifetime of your records. Dirt and dust can scratch your records, and it’s easy to leave fingerprints or hair on vinyl after every play which is harder to clean off than dust. The following are five methods for keeping your records and turntable in good health!

  1. Store your records vertically rather than stacking them horizontally to avoid scratches from the needle.
  2. When storing records, be sure to store them in their original sleeves. Discs tend to stack on top of each other in the sleeves, causing scratching.
  3. When cleaning off records and turntable surfaces, use a soft brush or cloth that doesn’t leave any lint. Although it seems counter-intuitive to use more force to dust off your turntable, this is actually a great way to avoid damaging the record since you don’t place too much pressure on it and you don’t scratch the surface when applying too much force.
  4. Clean your stylus regularly. Dirt and dust can cause it to wear out quicker, especially if you’ve switched from using a felt mat or if you like to place your records directly on the platter.
  5. Clean your records regularly as well. Dust on the record causes friction with the stylus, which wears out your records faster.

How to get rid of dust on turntable?

The dust on turntable is usually caused by two reasons: one is that the owner doesn’t pay attention to keeping the surface of the turntable clean, and when they play records, they use a dirty brush or cloth to wipe off the dust from their record. The other is that they use a dirty brush or cloth even if their discs aren’t dirty. The dust which comes off from record and turntable surface goes into the hose and spreads through the air, which makes the owner sick and eventually ruins their “important” music lover’s mood.

See also  Guide to the Best Turntables Under $2000

Dust-removing tools for turntable

Turntable cleaners can be divided into two categories: vacuum cleaners and brush cleaners. Vacuum cleaners are usually made from plastic or metal in order to reduce noise level. Some people prefer metal one because it’s said to be more durable than plastic one. When choosing a vacuum cleaner for your turntable, you should also consider the model of your table. In general, most of them use the same connector to connect to a power socket. So, even if you have different brands of the vacuum cleaners and record player, chances are that they will be compatible with each other.

Brush cleaners

Brush cleaners are usually designed with different shapes and sizes. They are made of high quality soft bristles, which are usually made from natural materials. They usually have a small round head, which is very suitable for cleaning record and turntable surfaces. It can also be used on all kinds of surfaces which require cleaning on both sides.

Most of the brush cleaners come with a long hose, which allows you to clean your turntable surface without bending down. You can use the vacuum cleaner directly by connecting it to a power socket.

Most brush cleaners come with a hose which allows you to clean your table surface without bending down. It should be used on both surfaces of the turntable. Also, it can also be used in situations like making up a new record by cleaning vinyl directly using the vacuum cleaner or hosing from one side of the record to another side.

Brush cleaners are usually made with soft bristles which are usually made from natural materials. They usually have a small round head, which is very suitable for cleaning record and turntable surfaces. It can also be used on all kinds of surfaces which require cleaning on both sides.
Most of the brush cleaners come with a long hose which allows you to clean your table surface without bending down. You can use the vacuum cleaner directly by connecting it to a power socket.
Before using the brush cleaner, you should first remove the dust on record and turntable surfaces with a vacuum cleaner. Then use your brush cleaner to clean both sides of your records and all parts of your table surface.

See also  Vinyl Records: The Best Albums to Have On Vinyl

Vacuum cleaners

Vacuum cleaners for record players are usually made from plastic or metal. It is said that most of them use the same connector to connect to a power socket, which makes it easier to use them on different brands of turntables.

When choosing your vacuum cleaner, you should also consider the model of your table. In general, most of them use the same connector. So, even if you have different brands of the vacuum cleaners and record player, chances are that they will be compatible with each other.

Before using your vacuum cleaner, you should first remove the dust on record and turntable surfaces with a vacuum cleaner.

When using a vacuum cleaner to clean records, you should be very careful not to put too much pressure on them because doing so could damage them. You should also try to avoid scratching the surface of your disc while cleaning it off if possible.

Clean Records With Alcohol

A well maintained turntable not only sounds better, but can also increase the lifetime of your records. Dirt and dust can scratch your records, and it’s easy to leave fingerprints or hair on vinyl after every play which is harder to clean off than dust. The following are five methods for keeping your records and turntable in good health!

  1. Store your records vertically rather than stacking them horizontally to avoid scratches from the needle.
  2. When storing records, be sure to store them in their original sleeves. Discs tend to stack on top of each other in the sleeves, causing scratching.
  3. When cleaning off records and turntable surfaces, use a soft brush or cloth that doesn’t leave any lint. Although it seems counter-intuitive to use more force to dust off your turntable, this is actually a great way to avoid damaging the record since you don’t place too much pressure on it and you don’t scratch the surface when applying too much force.
  4. Clean your stylus regularly. Dirt and dust can cause it to wear out quicker, especially if you’ve switched from using a felt mat or if you like to place your records directly on the platter.
  5. Clean your records regularly as well. Dust on the record causes friction with the stylus, which wears out your records faster.
See also  Best Home Theater Candy Display

How often should you clean your records?

Sometimes the record player can accumulate a lot of dust and dirt from playing records. You should clean them before they get too dirty.

There is no standard time for how often you should clean records, but you should remember to clean them every 6 months.

A New Vinyl Record Is Not Always Clean

You can know if your vinyl record is clean by touching it. If it feels smooth, then you can say that it’s already clean. But if after touching it feels like there is still some dust on the surface of the record, then you need to clean it with the brush cleaner.

Which Brush Cleaner Should I Use to Clean Records?

There are many brush cleaners available in the market. If you want to buy one, you should make sure that it is easy to use and has the necessary features. Before using a brush cleaner, you should first remove your vinyl record from its turntable and place it in the brush cleaner. After that, turn on the machine. When it begins to work, use a piece of cloth or paper towel to wipe down the surface of the vinyls. The brush cleaner will only work when the cleaning process is complete.

What Should I Do if There Are Still Some Dust on My Record?

If you want to clean your vinyl record, but there are still some dust on it, you should use the brush cleaner again. You should take your vinyls and brush cleaner to a shop so that they could clean it properly. If you use the brush cleaner without taking it to a shop, it might make your vinyls dirty.

Conclusion

If you want your vinyl records to sound better and last longer, you should regularly clean them using a brush cleaner. It is not expensive and easy to use. The main advantages of using a brush cleaner are that they are safe and do not damage your vinyl.

You should make sure that you have a record brush cleaner before cleaning your records as it will make the process easier for yourself.